BC Polyasphartic hard

Product Description:-

is a stand above all, two-component polyaspartic utilizing innovative proprietary nanotechnology. It provides a high gloss clear coating. Its superior penetration and bond- ing strength can provide years of abrasion, impact, and wear resistance. BC Polyasphartic hard yields chemical splash and spill resistance and hot tire pick-up resistance much like its epoxy counterpart.

PLEASE NOTE:

Applying material outside the suggested parameters may result in product failure. It is always recommended to test the product in a small, incon­ spicuous area (on the same concrete substrate) for desired results prior to application. When applying, do not exceed 400 ft2 per gallon. Applying too thin of a coating may cause inadequate film formation or performance expectations may be limited. DO NOT USE ON BRICK. Increased temperature will shorten re-coat window. Decreased temperature will lengthen re-coat window.

Application:

Application should be completed using a 3/8" synthetic nap, phenolic core roller, or a lambs wool cover for pigmented, stained floors, or media coats. Use a foam squeegee and back roll with the roller over media floors (quartz or chips). It is recommended to use only 18" wide squeegees and rollers. If considering using airless application method, consult the manufacturer prior to application. Please note that the use of pump-up style spray bottle may create visi- ble bubbles, blisters, and pinholes and is not recommended.